A Public Service Announcement or alternatively titled, "Sure, they may save money but........"

As I was talking to my mom today on the phone, I mentioned how any fly in my house pretty much had free reign, since I wasn't about to swat one anywhere close to our new $10.00 light bulbs -- of which I have 40. She told me that someone had just told yesterday about the danger these bulbs bring should one break. So I looked it up and on a Department of Environmental Protection site I found this bit of information.

What if I accidentally break a fluorescent lamp in my house?

The lamp contains a small amount of mercury, but you can clean this up yourself if you do the following:

Do not use a vacuum cleaner to clean up the breakage. This will spread the mercury vapor and dust throughout the area and could potentially contaminate the vacuum.

Keep people and pets away from the breakage area until the cleanup is complete.

Ventilate the area by opening windows, and leave the area for 15 minutes before returning to begin the cleanup. Mercury vapor levels will be lower by then.

For maximum protection and if you have them, wear rubber gloves to protect your hands from the sharp glass.

Carefully remove the larger pieces and place them in a secure closed container, preferably a glass container with a metal screw top lid and seal like a canning jar, a pickle, peanut butter or applesauce jar. A glass jar with a good seal works best to contain any mercury vapors inside.

Next, begin collecting the smaller pieces and dust. You can use two stiff pieces of paper such as index cards or playing cards to scoop up pieces.

Pat the area with the sticky side of duct tape, packing tape or masking tape to pick up fine particles. Wipe the area with a wet wipe or damp paper towel to pick up even finer particles.

Put all waste and materials into the glass container, including all material used in the cleanup that may have been contaminated with mercury. Label the container as “Universal Waste - broken lamp.”

Remove the container with the breakage and cleanup materials from your home. This is particularly important if you do not have a glass container.

Continue ventilating the room for several hours.

Wash your hands and face.

Take the glass container with the waste material to a facility that accepts “universal waste” for recycling.

When a break happens on carpeting, homeowners may consider removing throw rugs or the area of carpet where the breakage occurred as a precaution, particularly if the rug is in an area frequented by infants, small children or pregnant women.

Finally, if the carpet is not removed, open the window to the room during the next several times you vacuum the carpet to provide good ventilation.

The next time you replace a lamp, consider putting a drop cloth on the floor so that any accidental breakage can be easily cleaned up. If consumers remain concerned regarding safety, they may consider not utilizing fluorescent lamps in situations where they could easily be broken. Consumers may also consider avoiding CFL usage in bedrooms or carpeted areas frequented by infants, small children, or pregnant women. Finally, consider not storing too many used/spent lamps before recycling as that may increase your chances of breakage.

Don’t forget to properly recycle your used fluorescent bulbs so they don’t break and put mercury into our environment.

Well now, don't I feel better? I sense new carpet in our future.